Assembly of Bottom Panel Block
1) Attached the sealing tape to the flange for all of the bottom panel.
2) Method to Apply Tapes
- The sealing tape should be applied to all assembled flange surfaces.
- The centre side of the sealing tape should be overlapped by about 50mm
To assemble a bottom panel block, fIrst connect several bottom panels into a
sub-block. Determine the block size according to the site condition, the work
space, number of workers, use or non-use of a crane, etc.
A block that is too large cause difficulty in relocation and other work.
Therefore, it is recommended that one block be limited to 10 panels x 2rows.
Arrangement and type of bottom panels.
Place bottom panels one by one upside.
When installing a drain nozzle, place a pit panel in the pre-determined
position.
Assembly of Drain Panel
Using a hole saw(for a small bore),and a jigsaw(for large bore), the
required holes may be cut into panels.
SMC CO.,LTD
wwwgrptank.com
www.smctank.co.kr
