XI에폭시-400 (타일접착 보수주입바닥용)
'- Injection repair of concrete structure cracks.
- Injection into cracks of PC plates, tiles, concrete forming materials.
- Reinforcing anchors installed at slabs, columns and top plates.
- Injection into undone areas of concrete finish mortar, tiles and etc.
- Reinforcing of aged and/or weak sections of concrete structure.
XI에폭시-W1 (타일접착 보수벽면용)
XI-Epoxy-W(1) Tile Adhesion Repair Sealing Agent (For Wall)
'- Sealing repair of concrete structure cracks.
- Injection and sealing into cracks of PC plates, tiles, concrete forming materials.
- Reinforcing anchors installed at slabs, columns and top plates.
- Injection into undone areas of concrete finish mortar, tiles and etc.
- Reinforcing of aged and/or weak sections of concrete structure.
TS-2000 탄소섬유레진 (보강용수지)
TS-2000 Carbon fiber resin(Resin for reinforcement)
'- Pillar and bridge reinforcement
- Slab, silo, chimney reinforcement
DYN-1100 난연주입제 (내진 보수보강용)
DYN-1100 Resistance to flame injection agent (Earthquake resistance repair reinforcement)
'- Repair of Cracks in Concrete Structures
- Repair for injection of cracks in concrete molded products
- Reinforcement of Slabs, Columns, etc
- Injection and adhesion of raised parts such as concrete plaster mortar and plaster tiles
- Mold removal materials for growing and reinforcing aging and vulnerable parts of concrete
- Injection for reinforcing steel plates and seismic repair and reinforcement, and injection for machine first time
- For anchoring the anchor bolt
- For reinforcing the structure of the bridge and fixing the girders
DYN-1200 난연씰링제 (내진 보수보강용)
DYN-1200 Resistance to flame Sealing Agent (Earthquake resistance repair reinforcement)
'A flame retardant adhesive for attaching composite material panel materials such as carbon fiber composites and glass fiber materials to new or existing concrete structures for seismic repair and reinforcement
D-2001M 초저점도 주입제 (미세균열 및 소균열 주입용)
D-2001M Ultra Low Viscosity Injection (for microcracks and small cracks)
'- Injection to cracks of concrete structure.
- Injection to cracks of pc-plate, concrete molding.
- Reinforcing anchors of slabs, pillar, upper plate.
- Injection to the loose part of mortar or tile for plaster.
- Reinforcement for the old and weak parts of concrete.
D-200 건식 저점도 주입제 (소균열 범용 주입용)
D-200 Dry Low Viscosity (Small Crack Injection Agent for Concrete Structures)
'- Reinforcement to steel plate and compression Injection.
- Injection to mechanical loading parts.
- Filling up the floating parts of the bottom.
- Injection to small cracks.
DY-50 저압주입기 (균열보수공법)
DY-50 Low Pressure Injection (Crack Repair Method)
'- To fill up, repair, reinforce cracks in concrete, slab, wcross-beam and
foundation work.
- To fill up, repair, and reinforcement excitation of concrete structures such as
dams, floodgates, bridge, piers, psyro, power plant, chest pipes, etc .
D-130 건식 중점도 주입제 (철판보강 및 중균열 범용주입용)
D-130 Dry Mid-Viscosity Injector(Wide use for both steel plate reinforcement and heavy cracks injection)
'- Steel plate reinforcement and crushing injection.
- Injection to mechanical loading parts.
- Filling up the floating parts of the floor.
- IUse for Repairing the structure tank rack.
D-1000 고점도주입제(대균열 범용 주입용)
D-1000 High Viscosity Injection (wide use for large crack injection)
'- Injection into large crack area.
- Injection to brick-laying or floating
- Fixing anchor bolts, iron-plate anchors.
- Close refilling V-cutting area.
D-800 습식주입제(습윤면주입용)
D-800 Wet Injection Agent (Wet surface crack repair agent for concrete structures)
'- Inject to wet surface.
- Application after urethane water-stopping work.
D-418 수중 주입제
D-418 Underwater Injection
'- Injection to harbor, shipyard, tunnel and bridge-piers.
- Injection to the source of water, reservoir, water tank and waterway.
- Injection to the cracks of dam, electric power-house and water gate.
D-260 탄성 주입제
D-260 Elastic Injector
'- Concrete structures requiring high elasticity.
- Wet / dry works all applicable..
- Injection into crack sections of PC plates, concrete forming products applicable.
- Reinforcing of anchors at concrete slabs, columns, top plates & etc. applicable.
- Injection into undone areas of concrete mortar finishing, tiles & etc. applicable.
- Reinforcing the aged and/or weak sections concrete applicable
D-400 건식씰링제
D-400 Dry Sealant (Sealing for cracked pedestal,for steel plate reinforcement)
'- Adhesion on joint element of concrete structure & PC panel.
- Adhesion on bridge segment.
- Set-up crack surface sealing & sitting platform.
- Sealing adhesion on steel panel reinforced area.
- Adhesion on precast concrete soundproofing wall.
- Adhesion of joint area of precast PC culvert.
- Adhesion of road surface
D-600 탄성에폭시씰링제 (내,외벽V커팅용)
D-600 Elastic Epoxy Sealing Agent (For inner and outer wall V cutting)
'- For reinforcement after V-cutting of inner or outer walls of apartments.
- To reinforce in brick wall.
- For reinforcement the joint of various concrete structure.
D-1000S 고점도씰링제(구조물 대균열 바닥용)
D-1000s High Viscosity Sealing Agent (for structure cracks flooring)
'- Sealing of crack surfaces.
- Sealing of cracks on wall.
- Variety of other adhesion applications.
- Large size crack repair adhesion
DY-조이너W씰링제(수중 습윤면용)
DY-Joiner W Sealing Agent (for underwater)
'- For sealing harbor, water-way, dam, shipyard, subway.
- Sealing bridge-piers, water tank, reservoir.
- Sealing under-water structure and damp area.
GS-500 습식씰링제(습윤면용)
GS-500 Wet Sealant (For crack filling repair in concrete)
'- For sealing harbor, water-way, dam, shipyard, subway.
- Sealing bridge-piers, water tank, reservoir.
- Sealing under-water structure and damp area.
D-100 원코트 (내벽,외벽 균열부위 크랙보수용)
D-100 won-coat (one coat crack covering)
'- Crack cover of outer wall. (micro crack where chemicals injection is impossible)
- Use as finishing material after removing the stand and sealing materials. (After
crack repair, touch them with brushes to prevent re-crack)
- For cover the cracks in the living room, veranda, corridor and balcony.
- Reinforcement for window, rooftop, floor.
D-300 (신,구 콘크리트 접착제)
D-300 Epoxy Resin New,Old Concrete adhesive
'- Adhesive for Old-New concrete building surface.
- Surface adhesive
타일용 접착제(애니타일 DY-202, 친환경)
Epoxy Adhesive for Tile (Anytile, Eco-friendly)
Eco-friendly Tile Adhesive for Sick House Syndrome & Constructor’s Health
This adhesive for tiles, marbles and synthetic marbles is a two-component reaction adhesive with superior adhesive strength, water resistance and outstanding performance. This adhesive has spring & autumn type, summer type and winter type depending on the season. Unlike existing products, this eco-friendly product is without volatile organic compounds, formaldehyde, phenol, benzene, etc. and selected as the Eco-Friendly Certificated Product.
As an eco-friendly product, the color of the resin and hardener can change over time.
타일용 접착제(애니타일 DY-202, 일반)
Epoxy Adhesive for Tile (Anytile, Original)
This product is an adhesive with excellent adhesive strength and resistance to water for tile, marble and artificial marble and a high-performance two component liquid type reactive adhesive with an excellent workability. In addition, it is easy to use as mixing Resin with hardener agent at the ratio of 1 : 1
DY-Best 매직 타일줄눈제 욕실 바닥펄줄눈제
DY-BEST Magic tile joint sealing agent
The DY-Best Magic tile joint product is a semi-permanent, eco-friendly new urea with no discoloration and no white cast.
It's not a cheap epoxy. It's not a regular urea, but an eco-friendly top-class urea.
DY-101 애니스톤(석재용접착제) 외부 대리석 접착제
Epoxy Adhesive for Stone (Anystone)
This product is early curing adhesive for stone and a high-performance two component liquid type reactive adhesive which shows an excellent adhesive strength on wet surface and does not cause discoloration, stains or running on the surface of stone. In addition, it is easy to use as mixing base material with hardening agent at the ratio of 1 : 1 and can be used for
all seasons because of almost no change in viscosity regardless of season.
DY-Best Quality 순간접착제
DY-BEST Quality super glue
DY-Best Quality Instant Adhesive is a low viscosity (3cps) fast hardening instantaneous adhesive for stone and various materials can be adhered. It penetrates most adhesives, such as rubber, metal, plastic, stone, pottery, leather, etc. at high speed, and exhibits very fast and strong adhesion. It is the most common type of instantaneous adhesive with low viscosity.
DY-애니크리트(내화학 내약품성특수 산업용 바닥재)
DY-Anicrete (chemical-resistant, chemical-resistant, industrial flooring material)
'
- Cooking of foodstuffs (Kitchens at commercial sites, hospitals and hotels, fast food restaurants, In-flight meal processing plants)
- Food Processing (Milk processing, bakery, meat processing, chicken meat processing, salted and seasoned food processing, sauces, noodles, fries production processes)
- Beverages and Breweries (Beer, Distilled liquor, Carbonated soft drink, Fruit juice, Natural water production processes, bottling and can packing processes)
- Pharmaceutical manufacturing processes (Primary & secondary production processes, laboratories, Clean rooms, Pilot production laboratories)
- Chemical plants (Variety of chemical manufacturing sites subject to leakage, Tank farm facility areas)
- Electronic Industries (Electronic component manufacturing and storage areas)
- Engineering oriented jobsites (Plants, automobiles and other heavy material handling areas)
DYC-10크랙픽스(10M시공 소포장 균열보수제)
THC-12애니수
DY-123애니본드
DYC-Crack Fix (10 m construction packaging crack repair agent)/THC-128 Anywater/DY-321 epoxy
Crack repair injector engineering method (For 10M)
Crack fix DYC-10 is specially consist of injector set and sealant for structure repair & reinforcement and can be used by everyone. It can be used for the place where the surface is dry or moisture.
It penetrates easily to fine crack or gap and shows high level of adhesion for water-resistance of structure and abrasion resistance of inner steel bars. And it’s excellent to repair, reinforce and restore the structures after construction
SMC CO.,LTD
DONGYANG EPOXY CO.,LTD
ISO9001:14001
Head Office : 30, Hwanggeum 6-ro, Yangchon-eup, Gimpp-city , Gyeonggido,
South Korea.
T. +82 31 996 8822 F. +82 31 983 4586
e-mail : dongyangepoxy@dau.net / info@grptank.com
